Categories
Battery Information MK75 Firmware

Firmware Version 118 Released

Firmware version 118 has been released. This version mainly includes a fix for the charge efficiency calculations. Charge Efficiency is a measure of how much charge it takes to recharge a battery. For example if 100 amp hours is discharged from a battery and it requires 102 amp hours to fully recharge it then the […]

Categories
MK75 Firmware

Firmware Version 117 Released

Firmware version 117 has been released on September 19 2022. Firmware version 116 didn’t quite make it, so this is the next firmware version after version 115. This is a fairly major update to the firmware. It includes.. Network Code Updates The MK75 now keeps better track of it’s network status and will attempt to […]

Categories
How To's MK75 News

Zabbix system monitoring template produced for the MK75

Zabbix is a system which allows you to monitor any network device. A customer of ours has produced a Zabbix monitoring template which allows for monitoring and logging of the data from an MK75 Battery Monitor. Here is a link to the project: https://github.com/jonopryor/mkove-mk75-zabbix-template This could be useful for graphing or looking more closely at […]

Categories
Frequently Asked Questions

FAQ: Use of a larger shunt and shunt calibration values

Hi Neil, The shunt calibrate value to use with the MK70 500 amp shunt is 150. This is easy to set, just go to menus, settings and then Shunt Calibrate.  Set the value 150 and it’s done. -Darren Beckwww.mkove.com On 15/05/2022 2:19 pm, Neil wrote: Thanks for getting back to me so quickly. Will order […]

Categories
Frequently Asked Questions

FAQ: Display Activation

Question: Hello. I have finally found time to install my new MK75 monitor – looks good. I have noticed that it seems to requireĀ  more than 3 amps being discharged ( haven’t tried charging yet ) in order to activate ( ie wake up ) the monitor. Once it is activated it reads correctly. No […]

Categories
MK75 Firmware

Firmware version 115 released

Firmware version 115 has been released on May 11, 2022. This is a bug fix release. It should fix a possible bug where the state of charge of the battery monitor could at times not increase while charging.

Categories
MK75 Firmware

Firmware version 114 released

There have been a number of fairly minor changes between firmware versions 111 and 114.

Categories
MK75 Firmware

Firmware version 111 released

Firmware version 111 has been released. This version includes a fix for a problem where the device could not connect to a Wifi network which had spaces in the network name. Also includes other small fixes.

Categories
MK75 Firmware

Firmware version 110 released

Firmware version 110 has been released and is available as an over the air upgrade from our server. This version includes a State of Charge Fuel Gauge on the main screen.

Categories
MK75 Firmware MK75 News

Firmware version 109 released

Firmware version 109 has been released on February 15, 2022. This release includes updates to the data section menus as well as general improvements.